How long do i need to wait for the paint to cure to apply a lacquer or top coat. Also i painted a bed frame with the same paint but i know i should of sanded it first, if i use lacquer on it will it still scratch? (i really dont want to sand it down after taking so long to paint it.

Varnish vs. Polyurethane – How to Choose – BobVila.com

Varnish vs. Polyurethane – How to Choose.

Posted: Sat, 16 Jan 2016 09:34:57 GMT [source]

I used to use Varathane but now I’m a big Minwax fan. I find the finish consistently smooth where I sometimes had problems with brush marks using Varathane. The only way to know is to try both and see what YOU prefer.

Minwax Wipe On Poly Satin Is Really Semi

I will have to look into waterlox when I refinish my desk and the kitchen table. Even though we are novices, we want good results. i would be tempted to give up refinishing if the best I could do is the plastic, goppy result of the popular minwax polyshades. One minwax product that had good reviews from Fine Woodworking magazine, friends and the list is the Minwax wiping polyurethane. It was rated the best resistance and the best value.

  • However, the latter is often employed by professionals.
  • In other words, oil-based poly enhances the wood grain whereas a water-based product does not.
  • I’ve used this on many chalk painted dressers I’ve refinished.
  • The drawback to using different products is that your finish may look different .
  • I’ve seen and heard some amazing reviews though.
  • In order to find the best polyurethane for the wood in your home, there are some things you should consider to help narrow down your options.
  • We sanded them all, applied a pre-stain conditioner, and then applied one coat of Minwax Polyshades Stain and Polyurethane in One.
  • There are several clear coats in the marketplace but only one exceeds all others.

This is a naturally occurring phenomenon in paint application and does not necessarily constitute a defect in the paint finish or your technique. Bright white paints can yellow over time with or without topcoat. Once the stain color is set and cured (passed the color-fast test), apply 3 coats of the Minwax Water Based Polyurethane per label directions.

Bona Mega Wood Floor Finish Satin

Another inexpensive option is this polycrylic protective finish by Minwax. Like the Rust-Oleum variety, is is low odor and does not yellow over time. This product also comes in a satin finish, and is available in a one-quart size. The satin finish does not overwhelm the natural color of the wood, but instead gives it a nice shiny glow.

Lacquer vs. polyurethane: Paint pros & cons to make informed decisions – SILive.com

Lacquer vs. polyurethane: Paint pros & cons to make informed decisions.

Posted: Thu, 03 Sep 2015 07:00:00 GMT [source]

Which one is more resistant to heat and moisture? It’s important to know the differences so you can choose the right one for your wood projects. I was also having a problem with my second coat of stain drying on a table. After letting it dry for 12 hours and it was still sticky I tried using alcohol wipes. I took the wipes and wiped off the excess stain.

For new construction projects use a tool like a belt sander to remove extra wood and create a flat surface. First up is understanding that lacquer is an acrylic-based spray and a protective mask rated for chemical use is a must. While this finish may seem intimidating, with a long working time you’ll be able to adjust your approach. But make sure you have a level surface first and a heat gun for bubble control. First, not all finishes were made to be in contact with water. But Spar varnish is one of the exceptions and was made for contact with water.

You can see the bottom of the can thru varathane or minwax stains. In a previous life, I was a project manager for a drug company. They used plastic barriers to protect production areas from areas under construction. Or to get a cheap piece of furniture presentable for a few months while you are arranging its replacement.

Painted Furniture ~ Should I Wax Or Poly?

How many times have you hit the internet seeing home owners running and edger from right to left? Or running the belt or drum sanders from right to left. How many times have you seen home owners start with a 24 grit then go to 80 then 120? In both instances situations like that happen all the time.

Due to its overall versatility, it can be used indoors or out, and for a range of applications, including furniture, cabinets, decks, boats, and even bathroom floors. Polycrylic is generally said to dry clear, too, but as long as you’re careful with your application; it can take on a milky appearance if applied heavily over dark wood or paint. In the Minwax vs Varathane battle, we recommend Varathane as it is more efficient and durable when it comes to interior wooden jobs. However, if you are searching for a cost-effective product that can work on any type of surface, then Minwax is your perfect match.

For the best possible results, you need to apply this finish to unfinished or sanded surfaces. However, the work shouldn’t be enough to deter you from this product. You can find these suggestions in the Varathane product pamphlet. You can install it using a variety of application techniques. Most consumers said were in agreement that Bona HD holds up well over time. It’s essential that you only apply this to freshly sanded wood.

EVEN THEN it turned out streaky and wouldn’t dry evenly!!! I wanted to use a clear coat on the top to protect the painted finish. I tried brushing the Polycrylic, and it was streaky. If you’ve already returned from the hardware store, you’re just going to have to go back.

While polyurethane is water- or oil-based plastic resin, varnish is older and made from resins, oils, and solvents. Because of the higher ratio of solids, varnish is less susceptible to ultraviolet light damage. This finish gives a more tinted color when applied and requires more coats than polyurethane. This wood stain and sealer allows you to color and protect exterior wood in just one step and provides a weatherproof finish. This stain will help protect the wood on your outdoor project from mold, mildew and ultraviolet rays and dries to a durable finish.

Gel Stain 101 – When and How to Use It – BobVila.com

Gel Stain 101 – When and How to Use It.

Posted: Fri, 02 Jun 2017 18:29:23 GMT [source]

It is similar to someone asking for the quickest route from New York to L.A. The answer is “it depends on wherether your personal transportation includes a Leer that you know how to fly,otherwise plug it into mapquest”. Top of the line finishing products require expensive equipment and years of experience to realize their potential. One last piece of advise eventhough you didn’t ask. 90% of sucess in any refinishing project lies in preperation,be it painting a car,house,fence,the super dome or a thrift store chair. Use a thin layer of Minwax and apply it using a high quality natural or foam brush.

Polycrylic Vs Polyurethane Vs Lacquer (which Wood Finish Is Best?)

Chemically speaking, polyurethane finishing products are actual repeating chains of polymers that exposed to air become a super hard, transparent material. When you need durability, there’s no better choice than oil-based polyurethane. Polycrylics are an excellent second choice and may be the best choice for lighter wood surfaces. There’s no point trying to decide who has the cheapest cans when the true cost lies in the application. Oil-based polyurethane is perhaps the cheapest to apply, requiring only a good natural bristle brush. Oil-based polyurethane is one of the best choices out there for natural wooden floors.

Though I’m with you on using the duraseal quick dry, mainly because they color match with the Minwax Stains which most people associate with wood stains. My only real complaint is the cans are so hard to open. You are only supposed to put on one coat of stain, not 2, and certainly not 3. When you have more than 1 coat, the poly won’t adhere as well. It may be okay in some cases but will probably wear down a bit faster over time.

Black Wood Stain Samples On Red Oak

I have beginner classes all the way up expert trade classes. How long do you want this polyurethane to last, both after its initial application and before it is even used? Are you sealing a vertical surface, such as the sides of a bookcase? Polyurethane is easier to work with on an upright surface, as it is thicker than polycrylic and less prone to dripping. Are you working indoors without good ventilation? You’ll want to use polycrylic, which is less toxic than polyurethane, especially when working in a poorly ventilated area.

But, the truth of the matter is that the durability is driven much more by the quality of sanding job and the type, brand and number of coats of polyurethane use. Professional floor sanders know their trade very well and know how to “read” the floor well to know if it’s dry enough to apply polyurethane. And, if it isn’t dry enough, they will return the next day (as they know the cost of applying poly too soon (i.e. you need to start from scratch and sand the floors again). Hello, I appreciated your information on the different options for finishing.

I know I’ve mentioned this before and you’re skeptical of the hardness of wax finishes. 🙂 Might be worth at least trying on a sample piece of wood, maybe for a future project if you’ve already headed out and had oil paint minwax vs varathane clear coat mixed. It was a pretty easy and relaxing project, since I love to paint. I gave the whole table a quick sanding, following by a coat of oil-based primer. Then another quick sanding, and then I was ready to paint.

Varathane Classic Black

Polycrylic is the winner, here, as you need only soap and water to remove it from your hands, brushes, and other surfaces where it might spill during application. Oil-based polyurethane provides the most durable finish in high-use situations like flooring. They offer a plethora of products that include Varathane stain, Varathane polyurethane, satin gel, etc. Compared to Minwax, they are more products and tools that can work for both DIY and professional purposes. Robert Fergusson founded the brand in 1921, who initially used whale oil to manufacture the products. Now, they use resins that make their products more durable and provide them with outstanding clarity and expert finish.

This is an oxygen-crosslinking polyurethane that has a waterborne formula making it easy to use and durable. The oil-based stains can be easily applied with a brush. They provide an even, smooth protective finish on the surface of the wood. Although it helps the wood to appear rich and deep in color, you need to sand the bare wood properly to get the desired results. The water-based wood stain and semi-transparent color stain by Minwax will glorify your unfinished wood surface.

Anthony Donovan is a licensed general contractor specializing in general construction as well as bathroom and kitchen remodels. His favorite projects are those involving lots of retiling and woodwork upgrades. In his spare time, Anthony enjoys exploring the great outdoors or fixing things around the house.

Lacquers are resin-based solutions emulsified by solvents which dry into a hard transparent film when exposed to air. This is essentially a tie, with oil-based polyurethane offering the best overall protection, especially outdoors. Lacquer is the clear winner here, with water-based lacquers drying lightning fast compared to the competition. However, UV rays are notorious for discoloring finishes. Polyurethane is an interesting case, as it’s actually a form of plastic that has both solid and liquid applications.

Apparently she tried the other kind and it dissolved part of the clay, or made it lose shape, and become sticky and, to quote her, “Gross”. whitedragonpaper, I think it reacts with the clay, making it sticky. Hi, I’m using a waterbased polyurethane on my Premo and have had no toubles. A strip of painter’s tape was applied after the first coat dried, to separate the first and second coat on the sample. The tape was peeled off the next day before the top coat was applied.

The best practice is to use natural brushes for applying an oil-based finish to wooden surfaces. You should use synthetic brushes to use with latex, acrylic, or water-based finish. Also, you can use rollers and rags where you get good results.

Without describing the characteristics of lacquer and polyurethane again, let’s see how they compare with our winner. For furniture though, polyurethane is safer, cheaper, and easier to maintain. Lacquer also requires more coats to achieve full coverage, which potentially means having to invest in more of the product itself.

Source: homemakerguide.com